VIEW CART Continue shopping

M5 - M48, Threaded Bar, All Thread Studding, High Tensile, 8.8, Self Colour, 1m Lengths

M5 - M48 All-thread, Threaded Studding/ Bar/ Rod, 1000mm lengths of rolled steel. Fixaball sells 1000mm lengths of Self-Colour, Threaded Studding/ Bar/ Rod/, Zinc, High Tensile, Grade 8.8 in all diameters, with free post. Post upgrades...
£11.20 £16.80

M5 - M48 All-thread, Threaded Studding/ Bar/ Rod, 1000mm lengths of rolled steel.

Fixaball sells 1000mm lengths of Self-Colour, Threaded Studding/ Bar/ Rod/, Zinc, High Tensile, Grade 8.8 in all diameters, with free post. Post upgrades available at checkout.

Full Lengths are delivered in multiples 1000mm lengths.

Specify in the 'note to seller' at check out if you would like your threaded bar cut down (5 free cuts available from a 1m length)

Diameters Available: 

M5, M6, M8, M9, M10, M12, M14, M16, M18, M20, M22, M24, M27, M30, M33, M36, M42, M48

Please make your size and pack quantity selection from the drop down menus.

These studs are ROLL formed

Materials and Finishes available at Fixaball

 

Finishes

Material

Self- Colour

Zinc

Galvanised

Steel Grade 4.8 (Regular)

Yes

Yes

Yes

Steel Grade 8.8 (High Tensile)

Yes

Yes

Yes

  

All-Thread Studding can be used in the following applications:

  • Chemical Anchor
  • Can be used in repairs and to secure parts together
  • Manufacturing, automotive and construction industries
  • Electrical and plumbing purposes
  • For Temporary Down Ceiling Purpose
  • AC Fittings with down Ceiling.
  • For special purpose machineries where proper alignment is required.

 

Types of All-Thread Studding

All-thread Studding/ Bar/ Rod/ Chemical Anchor has a thread along the whole length of the cylindrically formed material.

Full-bodied (Wasted) or Undercut Studs?

For studs that are not completely threaded, there are two types of studs: full-bodied studs, and undercut studs. Full-bodied studs have a shank equal to the major diameter of the thread. Undercut studs have a shank equal to the pitch diameter of the screw thread. Undercut studs are designed to better distribute axial stresses. In a full-bodied stud the stresses are greater in the threads than in the shank.

Undercut studs (rolled thread) are also stronger because the metal is "rolled" up to the major diameter, not removed. This preserves the grain of the steel, and in some cases even enhances it. Full bodied studs (cut thread) are weaker because metal is removed to create the thread, disturbing the grain of the steel.

 

Undercut studs are only required in applications where the stud is exposed to fatigue. Cut threads are entirely suitable for many applications, even when rolled threads might be slightly stronger. Mass-produced fasteners (standard bolts and studs) are usually rolled, but jobbed parts with custom features can be cut on request.

 

Image is for illustrative purposes only.