4.8mm, Countersunk, Pop Rivets, Aluminium/ Steel, Bulk DIscounts.
4.8mm, Countersunk (CSK), Blind Rivets, Aluminium, Steel Shaft.
Fixaball sells all lengths of 4.8mm diameter, alu/ steel, dome, countersunk blind-rivets at the best internet prices.
Orders placed before 2pm are usually dispatched same day (Mon-Fri).
Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout. Packs weighing under 250grams are upgraded to 1st class as much as possible,
Please make your size and pack quantity selection from the drop down menus.
4.8mm, Countersunk (CSK), Blind Rivet Diameter: 4mm.
4.8mm, Countersunk (CSK), Blind Rivet Lengths Available:
|4.8 X 6 Aluminium / Steel Csk Head Rivets|
|4.8 X 8 Aluminium / Steel Csk Head Rivets|
|4.8 X 10 Aluminium / Steel Csk Head Rivets|
|4.8 X 12 Aluminium / Steel Csk Head Rivets|
|4.8 X 14 Aluminium / Steel Csk Head Rivets|
|4.8 X 16 Aluminium / Steel Csk Head Rivets|
|4.8 X 18 Aluminium / Steel Csk Head Rivets|
|4.8 X 20 Aluminium / Steel Csk Head Rivets|
|4.8 X 22 Aluminium / Steel Csk Head Rivets|
|4.8 X 25 Aluminium / Steel Csk Head Rivets|
|4.8 X 30 Aluminium / Steel Csk Head Rivets|
|4.8 X 35 Aluminium / Steel Csk Head Rivets|
Blind/ Pop Rivets
Blind rivets, commonly referred to as "pop" rivets (POP is the brand name of the original manufacturer, now owned by Stanley Engineered Fastening, a division of Stanley Black & Decker) are tubular and are supplied with a mandrel through the center. The rivet assembly is inserted into a hole drilled through the parts to be joined and a specially designed tool is used to draw the mandrel into the rivet. This expands the blind end of the rivet and then the mandrel snaps off. These types of blind rivets have non-locking mandrels and are sometimes avoided for critical structural joints because the mandrels may fall out, due to vibration or other reasons, leaving a hollow rivet that has a lower load-carrying capability than solid rivets. Furthermore, because of the mandrel they are more prone to failure from corrosion and vibration. Unlike solid rivets, blind rivets can be inserted and fully installed in a joint from only one side of a part or structure, "blind" to the opposite side.
Due to this feature, blind rivets are used mainly when access to the joint is available from only one side. The rivet is placed in a drilled hole and is set by pulling the mandrel head into the rivet body, expanding the rivet body and causing it to flare against the reverse side. As the head of the mandrel reaches the face of the blind side material, the pulling force is resisted, and at a predetermined force, the mandrel snaps at its break point, also called blind setting. A tight joint formed by the rivet body remains, the head of the mandrel remains encapsulated at the blind side, although variations of this are available, and the mandrel stem is ejected.
Countersunk Blind Rivets
The countersunk refers to the 120' angle which has been formed to fit into a pre-dirllied or pre-formed hole so that the rivet sits flush onto the fastened surface. This gives a smooth, higher quality look to a product and can also reduce wind resistance on a transport application.
Image is for illustrative purposes only.