8mm, 10mm, Sleeve Anchors, Countersunk, Pozidrive, Zinc

8mm and 10mm, Sleeve Masonry Anchors for Brick/ Block, Concrete, Stone. Zinc plated, ‘Countersunk’ Type.  Fixaball sells all sizes of sleeve countersunk, concrete anchors, at the best internet prices, with free...
£4.33

8mm and 10mm, Sleeve Masonry Anchors for Brick/ Block, Concrete, Stone. Zinc plated, ‘Countersunk’ Type. 

Fixaball sells all sizes of sleeve countersunk, concrete anchors, at the best internet prices, with free delivery.

Orders placed before 2pm are dispatched same day (Mon-Fri).

Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout. Packs weighing under 250grams are upgraded to 1st class as much as possible.

Please make your size and pack quantity selection from the drop down menus.

Zinc Plated, Countersunk Sleeve Anchor Lengths Available: 

Anchor Hole Size Anchor Length Pozidrive Size
8mm 60mm PZ 3
8mm 85mm PZ 3
     
10mm 75mm PZ 3
10mm 100mm PZ 3

 

Countersunk Sleeve, Masonry Anchor Description

A Countersunk sleeve anchor is an expansion anchor for fixing to all types of masonry, brick and non-porous stone. A countersunk head can fit into a countersunk hole leaving the fixing sitting flush, neat and modern on a visible surface. The Countersunk sleeve anchor is a thin walled sleeve anchor suitable for use in concrete, stone, brickwork, perforated bricks and dense concrete blocks. The diagonal slot enables the small gaps to be pulled down and a positive clamping force to be exerted through the fixture.

Zinc

Use a zinc plated, masonry anchor when you need to hold materials/ fixtures in the dry. Using a zinc sleeve anchor in the wet will negatively effect it's reliability, dramatically and make it fail in a relatively short time.

Installation

Drill the correct size hole, clear/ clean the hole, place the anchor in the hole, set the anchor by tightening the nut.     

Image is for illustrative purposes only.