M10, Socket Screw, Cap Head, A4/ 316 Stainless Steel, DIN 912.
M10 (Metric - 10mm Dia), Standard Coarse Pitch/ 1.5mm, Allen Socket, Cap Head, Bolt/ Screw, A4/ 316 Stainless Steel, DIN 912.
Fixaball sells all lengths of M10, A4/ 316 Stainless Steel, allen socket, cap head screw/ bolts at the best internet prices with free delivery.
Orders placed before 2pm are usually dispatched same day (Mon-Fri).
Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout. Packs weighing under 250grams are upgraded to 1st class as much as possible,
M10 Allen Socket, Cap Head, Screw/ Bolt lengths at Fixaball:
- 20mm
- 25mm
- 30mm
- 40mm
- 50mm
- 60mm
- 90mm
Socket Screw is short for, 'Socket Set Screw' or could be a generic term including the 'bolt' version. The, ‘Socket Screw,’ term is used to describe a fastener that is fully threaded in lengths up to and around 1 inch (from the underside of the head). Over around 1 inch in length the fastener will have a, 'shoulder,' or unthreaded, plain shank under the head. This space of unthreaded area confirms that the fastener is now a bolt (cap head, bolt in this case). A little confusing, no? Some engineers may call them screws if the person only uses the shorter length range of sizes, under an inch or so. Some people might simply call them Allen or, 'Allen bolts,' if they've never seen it written down in association with the Allen, Hexagonal Key. So, ‘Socket,’ refers to the hexagon shaped indentation found on the top of the fasteners’ head. Here, you can use a hexagon key (Allen Key) to tighten and loosen the fastener.
FIXABALL – Specialist Fixings and Fasteners Suppliers Hexagon/ Allen Key Sizes METRIC – Allen Socket, Cap Head, Screw Bolts |
|
Allen Socket, Cap Head Screw Size Diameter |
Allen/ Hex/ Hexagon Key Required to tighten and loosen |
M3 |
2.5 |
M4 |
3 |
M5 |
4 |
M6 |
5 |
M8 |
6 |
M10 |
8 |
M12 |
10 |
M14 |
12 |
M16 |
14 |
M18 |
14 |
M20 |
17 |
M22 |
17 |
M24 |
19 |
Material: A4/ 316 Stainless Steel.
Material/ Finish |
Appearance |
Level of Corrosion Resistance |
Typical Application |
A4 Stainless Steel |
Dull Shine |
Marine Grade |
Constant Weathering |
Metric Coarse and Metric Fine threads are in millimetre (mm) units and were developed to simplify the imperial systems. Europe moved to this system but the Americans choose Imperial as their default. A coarse thread has less helical coils per mm and a fine one has more. Coarse is used for heavier loads and fine is used for lighter loads prone to vibrations. Coarse threads are the, 'normal', most common versions.
Image is for illustrative purposes only.