M6, Projecting Bolt - Nut, Stud and Shield, Zinc, BULK DISCOUNTS.
M6 Projecting Bolt - Shield Anchor - Heavy Duty Fixing - Brick/ Masonry, Rawl/ Wall Bolt, Nut Type.
Fixaball.co.uk sells all sizes and lengths of 'nut type' projecting bolt, masonry anchors at the best internet prices, with free post.
Orders placed before 2pm are usually dispatched same day (Mon-Fri).
Please make your size and pack quantity selection from the drop down menus.
Max joining thicknesses available: 10mm, 25mm, 50mm.
DROP DOWN MENU Explanation
1st dimension/ size is diameter of the threaded bar that goes though the material to be fixed.
2nd dimension/ size refers to the maximum thickness of material the threaded bar is long enough to fix.
What is a projecting bolt and where are they most commonly applied?
Projecting Bolt, Masonry Shield Anchor is a heavy duty, builder’s masonry, expansion anchor, for fixing heavy materials and fixtures.
It can be used in concrete, brick/ block and non-porous stone.
It comprises of a 3 part shield, threaded bar (high tensile - grade 8.8), nut and washer. It is an expansion anchor that pushes outwards at 3 points as the nut is tightened.
Application
- Projecting bolts are used when material/ fixtures need to be held in place during installation.
- The projecting threaded bar is used as a locator.
- Care must be taken not to damage the thread during installation.
- Shield anchors have an added advantage of being able to function with holes that vary in size/ quality.
- A shield anchor will only ever be as good as the grade of material that it’s being fixed to.
Installation
Drill the correct sized hole, clear/ clean the hole (brush and air pump), place the anchor in the hole, set the fixture/ material in place, fix by tightening the nut.
Table: Shows typical masonry shield anchor properties
|
All measurements in Metric - mm |
||||||||
|
Thead Diameter |
Hole Diameter |
Hole Depth |
Fixture/ Material Clearance Hole |
Center Spacing Between Holes |
Minimum Distance From Edge of Material |
Tensile/ Pull Load k/N (tonnes) |
Shear Load k/N (tonnes) |
Torque to tighten Nm |
|
M6 |
12 |
50 |
7 - 8 |
120 |
80 |
3.5 |
2.1 |
6.5 |
|
M8 |
14 |
55 |
9 – 10 |
150 |
100 |
4.8 |
4.4 |
15 |
|
M10 |
16 |
65 |
11 – 12 |
180 |
120 |
6.2 |
6.1 |
27 |
|
M12 |
20 |
85 |
13 – 14 |
250 |
160 |
9.7 |
12.4 |
50 |
|
M16 |
25 |
125 |
17 - 18 |
290 |
190 |
21.3 |
27.6 |
120 |
|
All specifications are true with correct installation |
||||||||
Image is for illustrative purposes only.
Please choose from the following for technical and/ or sales enquiries.
- Fill out the website enquiry form
- Click on the CHAT icon on the website
- Call: 01242 522244
- Email: sam@fixaball.co.uk
Related Products
Sale
Sale
