M6, Socket Screw, Cap Head, A4/ 316 Stainless Steel, ISO 4762, DIN 912.

M6 (6mm Diameter) x 1.0mm Pitch, Standard Coarse Thread, Allen Socket, Cap Head, Screw/ Bolt,, A4/ 316 Stainless Steel, DIN 912. Fixaball sells all lengths of M6, A4/ 316 Stainless Steel, allen socket,...
£2.49 £3.98

M6 (6mm Diameter) x 1.0mm Pitch, Standard Coarse Thread, Allen Socket, Cap Head, Screw/ Bolt,, A4/ 316 Stainless Steel, DIN 912.

Fixaball sells all lengths of M6, A4/ 316 Stainless Steel, allen socket, cap screw/ bolts at the best internet prices with free delivery. (2nd Class Royal Mail). Postage upgrades available at checkout.

Orders placed before 2pm are usually dispatched same day (Mon-Fri).

M6 Cap Head, Socket Screw/ Bolt Lengths Available:

  • 10mm
  • 12mm
  • 16mm
  • 20mm
  • 25mm
  • 30mm
  • 35mm
  • 40mm
  • 50mm
  • 60mm

Socket Screw is short for, 'Socket Set Screw' or could be a generic term including the 'bolt' version. The, ‘Socket Screw,’ term is used to describe a fastener that is fully threaded in lengths up to and around 1 inch (from the underside of the head. Over 1 inch in length the fastener will have a, 'shoulder,' or unthreaded, plain shank under the head. This space of unthreaded area confirms that the fastener is now a bolt (cap head, bolt in this case). A little confusing, no? Some engineers may call them screws if the person only uses the shorter length range of sizes, under an inch or so. Some people might simply call them Allen or, 'Allen bolts,' if they've never seen it written down in association with the Allen, Hexagonal Key. So, ‘Socket,’ refers to the hexagon shaped indentation found on the top of the fasteners’ head. Here, you can use a hexagon key (Allen Key) to tighten and loosen the fastener.

Available Materials: A4 Stainless Steel.

Material/ Finish

Appearance

Level of Corrosion Resistance

Typical Application

A2 Stainless Steel

Dull Shine

External

Intermittent weathering

A4 Stainless Steel

Dull Shine

Marine Grade

Constant Weathering

 

    Metric Coarse and Metric Fine threads are in millimetre (mm) units and were developed to simplify the imperial systems. Europe moved to this system but the Americans choose Imperial as their default. A coarse thread has less helical coils per mm and a fine one has more. Coarse is used for heavier loads and fine is used for lighter loads prone to vibrations. Coarse threads are the, 'normal', most common versions.

     Image is for illustrative purposes only.