Quality Hand Taps, Metric, HSS, Fine, 1st/ Tapered.

Hand Taps for Engineers, 1st/ Tapered, Metric Fine, ISO 529/ BS 949. All sizes available. Fixaball.co.uk sells hand taps at 30% off RRP, with free, first class delivery. Orders placed...
£7.91

Hand Taps for Engineers, 1st/ Tapered, Metric Fine, ISO 529/ BS 949. All sizes available.

Fixaball.co.uk sells hand taps at 30% off RRP, with free, first class delivery.

Orders placed before 2pm are usually dispatched next day (Mon-Fri).

Please choose your size and pack quantity from the drop down menus.

Sizes Available

M4 X 0.5 MF TAPER LEAD HAND TAP
M4.5 X 0.5 MF TAPER LEAD HAND TAP
M5 X 0.5 MF TAPER LEAD HAND TAP
M6 X 0.75 MF TAPER LEAD HAND TAP
M8 X 1.0 MF TAPER LEAD HAND TAP
M9 X 1.0 MF TAPER LEAD HAND TAP
M10 X 1.25 MF TAPER LEAD HAND TAP
M11 X 1.0 MF TAPER LEAD HAND TAP
M12 X 1.25 MF TAPER LEAD HAND TAP
M14 X 1.5 MF TAPER LEAD HAND TAP
M16 X 1.5 MF TAPER LEAD HAND TAP
M18 X 1.5 MF TAPER LEAD HAND TAP
M20 X 1.5 MF TAPER LEAD HAND TAP
M6 X 0.5 MF TAPER LEAD HAND TAP
M8 X 0.75 MF TAPER LEAD HAND TAP
M10 X 1.0 MF TAPER LEAD HAND TAP
M12 X 1.5 MF TAPER LEAD HAND TAP
M14 X 1.25 MF TAPER LEAD HAND TAP
M18 X 2.0 MF TAPER LEAD HAND TAP
M20 X 2.0 MF TAPER LEAD HAND TAP
M11 X 0.75 MF TAPER LEAD HAND TAP
M12 X 1.0 MF TAPER LEAD HAND TAP
M14 X 1.0 MF TAPER LEAD HAND TAP
M16 X 1.0 MF TAPER LEAD HAND TAP
M18 X 1.0 MF TAPER LEAD HAND TAP
M20 X 1.0 MF TAPER LEAD HAND TAP

Hand Taps

Hand Taps are used to create a thread in a pre-drilled hole so that a fastener with the same size/ type of thread can be screwed into it to secure a component/ part. they should be used with a suitable lubricant for better quality threads and to prolong the life of the tap.

Taper Taps

Taper tap, also known as, 'starter taps', have a longer/ larger champfered end to ease the forming tool through the pre drilled hole. The taper is so to ease a tap better into an untapped hole. eg. Using a bottoming tap 1st would damage the first threads and possibly the thread at the start of the hole

2nd Taps

2nd taps are intermediate taps which assist in aligning and starting of the tap into an untapped hole. The number of tapered threads typically ranges from 3 to 5.

Bottoming Taps

A bottoming, or, 'plug', tap has no tapered, front edge. Instead it's tip is ground to a cutting edge meaning that it can create a thread to the bottom of a blind hole.

Metric Threads

Metric Coarse threads are in Millimetre (mm/ 1000ths of a metre) units and were developed to simplify the imperial systems. Europe moved to this system but the Americans choose Imperial as their default. A coarse thread has less helical coils per mm and a metric fine threads has more. A Coarse thread (most common/ standard thread) is used for heavier loads and fine is used for lighter loads prone to vibrations.

Image is for illustrative purposes only.

Please choose from the following for technical and/ or sales enquiries.

  • Fill out the website enquiry form at https://www.fixaball.co.uk/
  • Click on the CHAT icon on the website
  • Call: 01242 522244
  • Email: sam@fixaball.co.uk