M4 - M24, Hex Nyloc Nut, A2/ 304 Stainless Steel, DIN 985, T-Type.

M4, M5, M6, M8, M10, M12, M14, M16, M18, M20, M24, (Type-T) Nyloc Nut, A2/ 304 Stainless Steel, DIN 985. Fixaball sells all diameters of T-Type (thins) nylon insert nuts, A2/...
£1.99 £2.63

M4, M5, M6, M8, M10, M12, M14, M16, M18, M20, M24, (Type-T) Nyloc Nut, A2/ 304 Stainless Steel, DIN 985.

Fixaball sells all diameters of T-Type (thins) nylon insert nuts, A2/ 304 Stainless Steel at the best internet prices, with free delivery.

Orders placed before 2pm are dispatched same day (Mon-Fri).

Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout. Packs weighing under 250grams are upgraded to 1st class as much as possible.

Please make your size and pack quantity selection from the drop down menus.

Type-T, Nyloc Nut, A2/ 304 Stainless Steel, DIN 985 diameters available:

M4-0.70 NYLON INSERT LOCKING NUT A2/ 304 Stainless Steel COARSE DIN 985 
M5-0.80 NYLON INSERT LOCKING NUT A2/ 304 Stainless Steel COARSE DIN 985 
M6-1.00 NYLON INSERT LOCKING NUT A2/ 304 Stainless Steel COARSE DIN 985 
M8-1.25 NYLON INSERT LOCKING NUT A2/ 304 Stainless Steel COARSE DIN 985 
M10-1.50 NYLON INSERT LOCKING NUT A2/ 304 Stainless Steel COARSE DIN 985 
M12-1.75 NYLON INSERT LOCKING NUT A2/ 304 Stainless Steel COARSE DIN 985 
M14-2.00 NYLON INSERT LOCKING NUT A2/ 304 Stainless Steel COARSE DIN 985 
M16-2.00 NYLON INSERT LOCKING NUT A2/ 304 Stainless Steel COARSE DIN 985 
M18-2.50 NYLON INSERT LOCKING NUT A2/ 304 Stainless Steel COARSE DIN 985 
M20-2.50 NYLON INSERT LOCKING NUT A2/ 304 Stainless Steel COARSE DIN 985 
M24-3.00 NYLON INSERT LOCKING NUT A2/ 304 Stainless Steel COARSE DIN 985 

 

Nyloc/ Nylon Insert Nuts

A nyloc nut is a nut that locks, in a sense or is self-sticking and is less likely to loosen due to vibrations or stress. This is achieved through the addition of the nylon insert that has a diameter slightly smaller than the nuts’ thread. A fastener screwed into the nut cuts a thread into the plastic, therefore increasing the compression around it (tighter join). A nyloc nut is effective up to 121°C..

Image is for illustrative purposes only.