Projecting Bolt - Heavy Duty Fixing - Masonry Wall Bolt.

Projecting Bolt - Shield Anchor - Heavy Duty Fixing - Brick/ Masonry, Rawl/ Wall Bolt. Fixaball.co.uk sells all sizes and lengths of 'nut type' projecting bolt, masonry anchors at the best internet...
£1.20

Projecting Bolt - Shield Anchor - Heavy Duty Fixing - Brick/ Masonry, Rawl/ Wall Bolt.

Fixaball.co.uk sells all sizes and lengths of 'nut type' projecting bolt, masonry anchors at the best internet prices, with free, first class post.

Orders placed before 2pm are usually dispatched same day (Mon-Fri).

Please make your size and pack quantity selection from the drop down menus.

Projecting Bolt, Masonry Shield Anchor is a heavy duty, builder’s masonry, expansion anchor, for fixing heavy materials and fixtures.

It can be used in concrete, brick/ block and non-porous stone.

It comprises of a 3 part shield, threaded bar, nut and washer. It is an expansion anchor that pushes outwards at 3 points as the nut is tightened.

Application

  • Projecting bolts are used when material/ fixtures need to be held in place during installation.
  • The projecting threaded bar is used as a locator.
  • Care must be taken not to damage the thread during installation.
  • Shield anchors have an added advantage of being able to function with holes that vary in size/ quality.
  • A shield anchor will only ever be as good as the grade of material that it’s being fixed to.

Installation

Drill the correct sized hole, clear/ clean the hole (brush and air pump), place the anchor in the hole, set the fixture/ material in place, fix by tightening the nut.                                                                                                                                                                            

Table: Shows typical masonry shield anchor properties

All measurements in Metric - mm

Thead Diameter

Hole Diameter

Hole Depth

Fixture/ Material Clearance Hole

Center Spacing Between Holes

Minimum Distance From Edge of Material

Tensile/ Pull Load

k/N (tonnes)

Shear Load k/N (tonnes)

Torque to tighten Nm

M6

12

50

7 - 8

120

80

3.5

2.1

6.5

M8

14

55

9 – 10

150

100

4.8

4.4

15

M10

16

65

11 – 12

180

120

6.2

6.1

27

M12

20

85

13 – 14

250

160

9.7

12.4

50

M16

25

125

17 - 18

290

190

21.3

27.6

120

All specifications are true with correct installation

 

 

Image is for illustrative purposes only.

Please choose from the following for technical and/ or sales enquiries.

  • Fill out the website enquiry form
  • Click on the CHAT icon on the website
  • Call: 01242 522244
  • Email: sam@fixaball.co.uk