Sleeve Anchors, 'Nut-Type', A4/ 316 Stainless.
M6, M8, M10, M12, M16, Sleeve Masonry Anchors for Brick/ Block, Concrete, Stone. A4/ 316 Stainless Steel, NUT Type.
Fixaball.co.uk sell all sizes of A4/ 316 Stainless, Sleeve, Concrete/ Masonry Anchors, at the best internet prices, with free, 1st class delivery.
Orders placed before 2pm are usually dispatched same day (Mon-Fri).
Please make your size and pack quantity selection from the drop down menus.
Orders placed before 2pm are usually dispatched same day (Mon-Fri).
Please make your size and pack quantity selection from the drop down menus.
Description
Expansion anchor for fixing to all types of masonry, brick and non-porous stone. A countersink head can fit into a countersunk hole leaving the fixing sitting flush, neat and modern on a visible surface.
Material - A4/ 316 Stainless Steel
A4/ 316 is used when performance of a fixing depends on it's ability to withstand constant weathering and chemical attack. A4 (otherwise known as 316 grade) stainless steel is marine grade, meaning that it can resist corrosion/ degredation under continuous, mild chemical exposure (eg. salt spray).
Installation
Drill the correct size hole, clear/ clean the hole, place the anchor in the hole, set the anchor by tightening the nut.
Table to show important sleeve anchor dimensions:
FIXABALL All measurements in mm |
|||
Sleeve Anchor Size |
Hole Size |
Thread Diameter |
Max. Fixture Thickness |
6 x 35 |
6 |
M4 |
9 |
6 x 56 |
6 |
M4 |
20 |
8 x 40 |
8 |
M6 |
12 |
8 x 65 |
8 |
M6 |
37 |
8 x 85 |
8 |
M6 |
50 |
10 x 40 |
10 |
M8 |
3 |
10 x 50 |
10 |
M8 |
12 |
10 x 77 |
10 |
M8 |
35 |
10 x 97 |
10 |
M8 |
50 |
12 x 60 |
12 |
M10 |
12 |
12 x 75 |
12 |
M10 |
27 |
12 x 99 |
12 |
M10 |
50 |
12 x 129 |
12 |
M10 |
80 |
Image is for illustrative purposes only.
Please choose from the following for technical and/ or sales enquiries.
- Fill out the website enquiry form
- Click on the CHAT icon on the website
- Call: 01242 522244
- Email: sam@fixaball.co.uk