M5 - M48 x 1000mm, Self Colour, Grade 4.8, All Threaded Bar/ Studding/ Rod
100cm Threaded Bar, Self Colour, Grade 4.8 Studding/ Bar/ Rod – Full bodied.
Fixaball sells all diameters of grade 4.8, all thread, self-colour bar at the best internet prices with a free delivery option.
Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout. Packs weighing under 250grams are upgraded to 1st class as much as possible.
Full Lengths are delivered in multiples 1000mm lengths.
Specify in the 'note to seller' at check out if you would like your threaded bar cut down (5 free cuts available from a 1m length)
Diameters (METRIC - mm)
M5, M6, M8, M10, M12, M14, M16, M20, M22, M24, M27, M30, M34, M36, M42 and M48.
All-Thread Studding can be used in the following applications:
- Chemical Anchor
- Can be used in repairs and to secure parts together
- Manufacturing, automotive and construction industries
- Electrical and plumbing purposes
- For Temporary Down Ceiling Purpose
- AC Fittings with down Ceiling.
- For special purpose machinery where proper alignment is required.
Types of Threaded Bar
Full bodied or undercut?
All-thread Studding/ Bar/ Rod/ Chemical Anchor has a thread along the whole length of a cylindrical formed material.
There are two types of studs: full-bodied studs, and undercut studs. Full-bodied studs have a shank equal to the major diameter of the thread. Undercut studs have a shank equal to the pitch diameter of the screw thread. Undercut studs are designed to better distribute axial stresses. In a full-bodied stud the stresses are greater in the threads than in the shank.
Undercut studs (rolled thread) are also stronger because the metal is "rolled" up to the major diameter, not removed/ cut away/ wasted. This preserves the grain of the steel, and in some cases even enhances it. Full bodied studs (cut thread) are weaker because metal is removed to create the thread, disturbing the grain of the steel.
Undercut studs are only required in applications where the stud is exposed to fatigue. Cut threads are entirely suitable for many applications, even when rolled threads might be slightly stronger. Mass-produced fasteners (standard bolts and studs) are usually rolled, but jobbed parts with custom features can be cut on request.
Image is for illustrative purposes only.