Threaded Bar/ Studding, Self Colour, High Tensile (8.8).

All-thread, Threaded Studding/ Bar/ Rod, 900mm lengths of rolled steel. Buy steel grade 4.8, 8.8 in zinc, galvanised and self-colour or A2/ 304 and A4/ 316 Stainless Steel threaded bar at Fixaball. Lengths...
£5.60

All-thread, Threaded Studding/ Bar/ Rod, 900mm lengths of rolled steel.

Buy steel grade 4.8, 8.8 in zinc, galvanised and self-colour or A2/ 304 and A4/ 316 Stainless Steel threaded bar at Fixaball.

Lengths are 900mm

Lengths can be cut to order at no additional expense - 01242 522244

Please make your size and pack quantity selection from the drop down menus.

For 2 & 3 pack quantities, please select multiples of a 1 threaded bar.

These studs are ROLL formed

Materials and Finishes available at Fixaball

 

Finishes

Material

Self- Colour/ None

Zinc

Galvanised

Steel Grade 4.8 (Regular)

Yes

Yes

Yes

Steel Grade 8.8 (High Tensile)

Yes

Yes

Yes

A2 Stainless Steel

Yes

No

No

A4 Stainless Steel

Yes

No

No

 

Diameters available at Fixaball

M6, M8, M10, M12, M16, M20, M24, M30, M33, M36, M42, M48

Lengths can be cut to order - 01242 522244

 

All-Thread Studding can be used in the following applications:

  • Chemical Anchor
  • Can be used in repairs and to secure parts together
  • Manufacturing, automotive and construction industries
  • Electrical and plumbing purposes
  • For Temporary Down Ceiling Purpose
  • AC Fittings with down Ceiling.
  • For special purpose machineries where proper alignment is required.

 

Types of All-Thread Studding

All-thread Studding/ Bar/ Rod/ Chemical Anchor has a thread along the whole length of the cylindrically formed material.

Full-bodied (Wasted) or Undercut Studs?

For studs that are not completely threaded, there are two types of studs: full-bodied studs, and undercut studs. Full-bodied studs have a shank equal to the major diameter of the thread. Undercut studs have a shank equal to the pitch diameter of the screw thread. Undercut studs are designed to better distribute axial stresses. In a full-bodied stud the stresses are greater in the threads than in the shank.

Undercut studs (rolled thread) are also stronger because the metal is "rolled" up to the major diameter, not removed. This preserves the grain of the steel, and in some cases even enhances it. Full bodied studs (cut thread) are weaker because metal is removed to create the thread, disturbing the grain of the steel.

 

Undercut studs are only required in applications where the stud is exposed to fatigue. Cut threads are entirely suitable for many applications, even when rolled threads might be slightly stronger. Mass-produced fasteners (standard bolts and studs) are usually rolled, but jobbed parts with custom features can be cut on request.

 

Image is for illustrative purposes only.

Please choose from the following for technical and/ or sales enquiries.

  • Fill out the website enquiry form
  • Click on the CHAT icon on the website
  • Call: 01242 522244
  • Email: sam@fixaball.co.uk