8mm, 10mm, Sleeve Anchors Countersunk, Pozidrive, Zinc

8mm and 10mm, Sleeve Masonry Anchors for Brick/ Block, Concrete, Stone. Zinc plated, ‘Countersunk’ Type.  Fixaball sells all sizes of sleeve countersunk, concrete anchors. Countersunk Sleeve, Masonry Anchor Description A Countersunk...
£4.33

8mm and 10mm, Sleeve Masonry Anchors for Brick/ Block, Concrete, Stone. Zinc plated, ‘Countersunk’ Type. 

Fixaball sells all sizes of sleeve countersunk, concrete anchors.

Countersunk Sleeve, Masonry Anchor Description

A Countersunk sleeve anchor is an expansion anchor for fixing to all types of masonry, brick and non-porous stone. A countersunk head can fit into a countersunk hole leaving the fixing sitting flush, neat and modern on a visible surface. The Countersunk sleeve anchor is a thin walled sleeve anchor suitable for use in concrete, stone, brickwork, perforated bricks and dense concrete blocks. The diagonal slot enables the small gaps to be pulled down and a positive clamping force to be exerted through the fixture.

 

Orders placed before 2pm are dispatched same day (Mon-Fri).

Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout. 

Please make your size and pack quantity selection from the drop down menus.

Zinc Plated, Countersunk Sleeve Anchor Lengths Available: 

Anchor Hole Size Anchor Length Pozidrive Size
8mm 60mm PZ 3
8mm 85mm PZ 3
     
10mm 75mm PZ 3
10mm 100mm PZ 3

 

 

Zinc

Use a zinc plated, masonry anchor when you need to hold materials/ fixtures in the dry. Using a zinc sleeve anchor in the wet will negatively effect it's reliability, dramatically and make it fail in a relatively short time.

Installation

Drill the correct size hole, clear/ clean the hole, place the anchor in the hole, set the anchor by tightening the nut.     

Image is for illustrative purposes only.