Chemical Anchor Sleeve, Plastic/ Nylon.

Chemical Anchor Sleeve, Plastic/ Nylon, with Allignment Collar Fixaball sells quality chemical anchor resin sleeves. Purpose They are plastic, nylon mesh so that the resin can pass through into the voids...
£2.69

Chemical Anchor Sleeve, Plastic/ Nylon, with Allignment Collar

Fixaball sells quality chemical anchor resin sleeves.

Purpose

They are plastic, nylon mesh so that the resin can pass through into the voids of the hollow substrate, spread the load of the anchor stud, fixing heavy loads, securely.

They can be used in the following hollow, masonry applications:

  • Slab
  • Sand-lime Brick
  • Brick
  • Lightweight Concrete Block

They aren't suitable for cracked, hollow masonry

Advantages

  • Reduces/ controls consumption of resin
  • User-friendly installation in hollow substrates
  • Hole cleaning is not necessary

Orders placed before 2pm are dispatched same day (Mon-Fri).

Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout. 

 

Installation

  • Insert the threaded bar/ studding into the centre of the sleeve.

Fixaball Fixings and Fasteners

All Sizes in MM

Sleeve Diameter

Sleeve Length

Hole Diameter

Minimum Hole Depth

Suitable Threaded bar

12

50

12

80

M8

15

85

16

110

M10, M12

20

85

22

110

M16

 

 
 

1. Drill the hole square and remove large chippings.

2. Insert the sleeve in the hole so that it's top lip is flush with the surface of the substrate.

3. Apply the resin in 100 % of depth of the hole 

4. The stud must be held in the centre of the sleeve and set in the centre for maximum effecieny

5. After the resin has set, do not over tighten the fixing to avoid breaking the fix.

 

Image is for illustrative purposes only.