M6, Projecting Bolt - Nut, Stud and Shield, Zinc

M6, 6mm Diameter Stud, Projecting Bolt - Shield Anchor - Heavy Duty Fixing - Brick/ Masonry, Rawl/ Wall Bolt, Nut and Stud Type. Fixaball sells lengths of M6/ 6mm Diameter, 'nut...
£4.18

M6, 6mm Diameter Stud, Projecting Bolt - Shield Anchor - Heavy Duty Fixing - Brick/ Masonry, Rawl/ Wall Bolt, Nut and Stud Type.

Fixaball sells lengths of M6/ 6mm Diameter, 'nut type' projecting bolt, masonry anchors.

What is a projecting bolt and where are they most commonly applied?

Projecting Bolt, Masonry Shield Anchor is a heavy duty, builder’s masonry, expansion anchor, for fixing heavy materials and fixtures.

It can be used in concrete, brick/ block and non-porous stone.

It comprises of a 3 part shield, threaded bar (high tensile - grade 8.8), nut and washer. It is an expansion anchor that pushes outwards at 3 points as the nut is tightened.

 

Orders placed before 2pm are dispatched same day (Mon-Fri).

Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout. 

Please make your 'No. of Items in Pack', 'Length' and 'Quantity' of packs, selection from the drop down menus.


Max joining thicknesses available: 10mm, 25mm, 50mm.

 

Application

  • Projecting bolts are used when material/ fixtures need to be held in place during installation.
  • The projecting threaded bar is used as a locator.
  • Care must be taken not to damage the thread during installation.
  • Shield anchors have an added advantage of being able to function with holes that vary in size/ quality.
  • A shield anchor will only ever be as good as the grade of material that it’s being fixed to.

Projecting Bolt Installation

Drill the correct sized hole, clear/ clean the hole (brush and air pump), place the anchor in the hole, set the fixture/ material in place, fix by tightening the nut.                                                                                                                                                                            

Table: Shows typical masonry shield anchor properties

All measurements in Metric - mm

Thead Diameter

Hole Diameter

Hole Depth

Fixture/ Material Clearance Hole

Center Spacing Between Holes

Minimum Distance From Edge of Material

Tensile/ Pull Load

k/N (tonnes)

Shear Load k/N (tonnes)

Torque to tighten Nm

M6

12

50

7 - 8

120

80

3.5

2.1

6.5

M8

14

55

9 – 10

150

100

4.8

4.4

15

M10

16

65

11 – 12

180

120

6.2

6.1

27

M12

20

85

13 – 14

250

160

9.7

12.4

50

M16

25

125

17 - 18

290

190

21.3

27.6

120

All specifications are true with correct installation

 

 

Image is for illustrative purposes only.